Relay Clips

Relay Clips

For this rig section, you will need....
small swivel
Relay Clip
Rubber tubing
Plus items to make an attached snood with such as:
amnesia, hooks, beads, sequines, power gum etc..

Cut the end of the bodyline into a point (helps to thread on such things as beads, sequins, crimps etc...)

You will need to cut a section of the rubber tubing provided to slip over the lower half of the clip ... make sure it is the same length to give maximum grip to the body line....

Now slip the body line through the cut section of tubing....

Thread the line through the first hole in the mid-section of the clip....

Now slip on the swivel.....

Carefully tread the line through the top section......

This sequence shows attachment for a clip-up rig....
If you are making a clip-down rig the reverse steps 4 to 7.

Starting by threading the top of the clip, then swivel, then lower section of clip, and lastly the rubber sleave...........

Now push the rubber sleave over the lower half of the clip to hold it in place .. helps if you have the clip alligned in the required potion beforehand as it can be quite tricky to twist into place once the rubber tube is in place...

You should now have something that looks like this!!!!!

Tie-off the snood length to the swivel...,
using a grinner knot or half blood knot...
Slid the clip up or down as required....

Return to Rig Index

	For this rig section, you will need.... small swivel Relay Clip Rubber tubing Plus items to make an attached snood with such as: amnesia, hooks, beads, sequines, power gum etc..
	Cut the end of the bodyline into a point (helps to thread on such things as beads, sequins, crimps etc...)
	You will need to cut a section of the rubber tubing provided to slip over the lower half of the clip ... make sure it is the same length to give maximum grip to the body line....
	Now slip the body line through the cut section of tubing....
	Thread the line through the first hole in the mid-section of the clip....
	Now slip on the swivel.....
	Carefully tread the line through the top section...... This sequence shows attachment for a clip-up rig.... If you are making a clip-down rig the reverse steps 4 to 7. Starting by threading the top of the clip, then swivel, then lower section of clip, and lastly the rubber sleave...........
	Now push the rubber sleave over the lower half of the clip to hold it in place .. helps if you have the clip alligned in the required potion beforehand as it can be quite tricky to twist into place once the rubber tube is in place...
	You should now have something that looks like this!!!!!
	Tie-off the snood length to the swivel..., using a grinner knot or half blood knot... Slid the clip up or down as required....